达里诺尔湖水体DOM荧光特征及其来源解析

达里诺尔湖（简称“达里湖”）是内蒙古自治区高原地区重要的生态屏障,探究达里湖水质状况及污染来源,对加强流域水环境治理、改善水环境质量具有十分重要的意义.于2018年9月及2019年6月对湖水进行采样,并通过三维荧光光谱结合PARAFAC（平行因子分析）模型,探究达里湖水体DOM（溶解性有机质）来源及其与水质的关系.结果表明:①达里湖水体中pH较高,ρ（DOC）（DOC为溶解性有机碳）、ρ（NH₄+-N）、ρ（TP）相对较高,均超过GB 3838—2002《地表水环境质量标准》Ⅴ类水质标准限值.②水体中DOM含4种荧光组分.夏季水体DOM主要分布于河流入湖口附近,其中,类腐殖质荧光组分（紫外区类富里酸和可见区类富里酸）占总组分的62.93%,类蛋白类荧光组分（类色氨酸和类酪氨酸）占总组分的36.07%;秋季水体DOM主要分布于东南侧,其中,类腐殖质荧光组分占总组分的40.52%,类蛋白类荧光组分占总组分的59.48%.③达里湖采样点荧光参数表明,达里湖DOM自生源特征较强,腐殖化程度较低.类腐殖质荧光组分与ρ（DOC）、ρ（Chla）均呈正相关,类色氨酸荧光组分与pH呈正相关,类络氨酸与ρ（DTN）、ρ（NH4+-N）、ρ（DTP）均呈正相关.研究显示,达里湖DOM具有陆源与生物源双重特性,DOM的形成与微生物、细菌、浮游生物的生命活动密切相关.      

江苏宿迁地震台短水准测量场地改造的探讨

地震前兆数据观测中,经常会遇到各种干扰,有的干扰可以很快排除,但有的是无法排除的.目前我们的短水准受到铺路影响就属于后一种情形,它直接影响到我们测量场地的生存.为了让观测数据得以延续,我们努力寻找解决问题的办法,最后采用把观测点平移再对比观测的方法来解决问题.     

北运河水体中荧光溶解性有机物空间分布特征及来源分析

利用激发发射矩阵荧光光谱(EEMs)并结合平行因子分析(PARAFAC),研究了北运河荧光溶解有机物(fluorescent dissolved organic matter,FDOM)的荧光组分及其空间分布特征,并对各河段FDOM的来源进行了分析.结果表明,北运河水体FDOM的组分中,代表类腐殖物质的组分含量较多,占总荧光强度平均比例的76.18%,而类蛋白质物质占23.82%.各组分荧光强度与氮、磷等污染物呈显著相关关系,说明FDOM与氮、磷等元素的迁移转化有关系;溶解性有机质呈现出明显的空间分布格局,从上游到下游为先降低后升高.上游区域的FDOM含量受工业废水和沿岸农业径流的影响,溶解性有机质含量较高;中游区域主要受少量生活废水排放的影响,溶解性有机质含量较低;下游区域FDOM来源于周边畜禽养殖废水、生活污水、乡镇工业废水和农田退水等,该区域类蛋白物质的相对丰度明显增加,溶解性有机质含量最高.污水处理厂出水中DOM的含量较高,表明污水处理效果有待进一步提高.     

长江口及邻近海域春夏季有色溶解有机物时空分布特征及主要影响因素

利用三维荧光光谱(EEMs)-平行因子(PARAFAC)分析技术对长江口及邻近海域春季(2015年3月)和夏季(2015年7月)有色溶解有机物(CDOM)的荧光组成及分布特征进行分析.共识别出2类4个荧光组分,即类腐殖质组分C1(370/495nm)、C2(330/405 nm)、C3(365/440 nm)及类蛋白质组分C4(295/345 nm).春夏季各层4个荧光组分分布模式基本一致,从长江口到邻近海域逐渐降低.春季类腐殖质组分的高值区分布在长江口内,而类蛋白组分高值区位于南槽附近区域,表层的CDOM主要来源于陆源输入和人类活动;中层荧光强度值比表层低,受陆源影响减弱;底层荧光强度值比中层略高,是由沉积物再悬浮造成的.各荧光组分在岱山县附近海域均有一个较高值,这与岛上的居民活动有关.夏季荧光组分高值区与春季相似,各层荧光组分值接近,说明夏季研究区域水体混合较均匀.春夏季腐殖化指数(HIX)在长江口较高,而生物指数(BIX)在邻近海域较高.将4个荧光组分(C1~C4)、吸收系数(a355)与盐度(S)、溶解有机碳(DOC)、总氮(TN)、总磷(TP)、叶绿素a(Chl-a)、溶解氧(DO)做冗余分析.结果表明,4个荧光组分(C1~C4)与总氮(TN)、总磷(TP)主要受陆源输入、人类活动的影响,溶解有机碳(DOC)受陆源与海源的共同影响.本文利用三维荧光光谱-平行因子分析(EEMs-PARAFAC)技术结合多元统计方法解析了CDOM组成,清晰揭示了长江口及邻近海域CDOM的来源及主要影响因子,可为河口海域生源要素海洋生物地球化学研究提供有益的补充.     

A Comprehensive Python Toolkit for Accessing High‐Throughput Computing to Support Large Hydrologic Modeling Tasks

The National Flood Interoperability Experiment (NFIE) was an undertaking that initiated a transformation in national hydrologic forecasting by providing streamflow forecasts at high spatial resolution over the whole country. This type of large‐scale, high‐resolution hydrologic modeling requires flexible and scalable tools to handle the resulting computational loads. While high‐throughput computing (HTC) and cloud computing provide an ideal resource for large‐scale modeling because they are cost‐effective and highly scalable, nevertheless, using these tools requires specialized training that is not always common for hydrologists and engineers. In an effort to facilitate the use of HTC resources the National Science Foundation (NSF) funded project, CI‐WATER, has developed a set of Python tools that can automate the tasks of provisioning and configuring an HTC environment in the cloud, and creating and submitting jobs to that environment. These tools are packaged into two Python libraries: CondorPy and TethysCluster. Together these libraries provide a comprehensive toolkit for accessing HTC to support hydrologic modeling. Two use cases are described to demonstrate the use of the toolkit, including a web app that was used to support the NFIE national‐scale modeling.     

恐惧诉求对职业驾驶员安全驾驶态度和行为意向的影响

研究以EPPM模型作为理论框架,探讨恐惧诉求对危险驾驶行为(超速和不系安全带)态度和行为意向的作用。54名职业驾驶员在观看交通安全恐惧诉求录像后,完成安全驾驶行为问卷。回归分析表明恐惧诉求的交通事故录像能够改变驾驶员对超速及不系安全带驾驶的态度和行为意向,但作用不完全一致。恐惧情绪唤起通过恐惧情感所引发的威胁评估过程中介对不超速行为意向的影响。最后,对研究的局限和未来的研究进行讨论。     

建设项目竣工验收现场平行样控制指标研究

依据建设项目竣工环境保护验收中污水监测的要求,通过积累大量验收监测质量检查的实验数据,运用数理统计的方法,以化学需氧量和氨氮两个项目为例,建立了质控数据的评价方法,并确定了现场平行样偏差指标的限値。     

PARALLEL DRAINS FROM THE LAPLACE STANDPOINT1

Where natural drainage is inadequate for keeping the water table below the root zone of the crops being grown, drains are often employed to control water table levels. Such drains are commonly installed in parallel lines at depths and spacings adapted to the needs of the area. Formulas used for determining drain spacings are generally based upon Dupuit-Forchheimer concepts. These developments postulate a saturated, permeable aquifer underlying the irrigated area and an impermeable barrier underlying the aquifer. The basic differential equation expresses the requirement that the flow out through the sides of a vertical column of infinitesmal cross sectional area must be supplied by a corresponding drop of the water table at the top of the column. If variations of transmissivity due to variations of water table level are taken into account the second order differential equation obtained is nonlinear. To avoid the mathematical difficulties posed by this nonlinearity it is customary to neglect the effects of changes of transmissivity due to changes of water table levels. This imposes a restriction that the formulas derived from these linearized differential equations suffer a loss of accuracy if the change of water table levels becomes a considerable portion of the initial saturated depth. Offsetting these difficulties is the tactical advantage that the linearized differential equations are of types long studied in older developments concerned with conduction of heat in solids. The advantages conferred by the possibilities for exploiting the results of investigations in the older discipline are many. An alternative approach is based upon a requirement that there can be no accumulation of water in any elementary cubical volume located in the zone of complete saturation below the water table. The differential equation obtained on this basis, if the aquifer is homogeneous and isotropic, is the one which bears the name of Laplace. It will be the purpose of this paper to explore the possibilities afforded by this approach for evaluating the flow to parallel drains and to compare the results with those obtainable by the Dupuit-Forchheimer method.     

增压风机并联运行中脱硫系统入口压力控制

分析了石灰石-石膏湿法脱硫系统(WFGD)中2台增压风机并联运行的入口压力控制问题,讨论并提出了一种基于前馈--反馈加偏置的脱硫系统入口压力自动控制方案,并以某600MW超临界机组双增压风机脱硫系统的入口压力控制为例加以分析说明.     

运用三维荧光光谱解析高温厌氧产氢反应过程对温度变化的响应

为建立反应器运行状态的荧光光谱快速监测方法,应用三维荧光光谱表征了高温厌氧反应器的出水,采用平行因子分析方法分析后得到3种荧光组分——蛋白质、辅酶NADH和核黄素,并获得它们的激发发射光谱图及相对浓度.结果表明,当温度从50 ℃上升到60 ℃的过程中,3种荧光物质的相对浓度均呈现相应的变化,它们与反应器的运行参数呈现明显相关性.进一步研究表明,核黄素是高温厌氧产氢反应中的特有荧光物质,采用标准加入法和二阶校正方法可以测定其实际浓度,出水中核黄素浓度变化范围为0.04~0.13 mg·L^-1.该研究为厌氧产氢反应器的运行监控提供了理论基础.